Walls should be wet down before getting scrubbed, then washed with a gallon of water mixed with 1 cup chlorine bleach and 1 cup of either a concentrated, phosphate-free cleaner, such as a trisodium phosphate (TSP) substitute, or Jomax House Cleaner. Working in sections, from the bottom to the top, will avoid streaks. Be sure to rinse walls well before the solution dries. Wood siding and trim should be ready to paint after a day or two of dry weather.
As the dance proceeds, keep an eye on the weather. Rain can wash freshly applied latex right off the wall, and a temperature dip below 50 degrees F two days after application can interfere with adhesion and curing and dull the sheen of glossy paints. (Latexes like Sherwin-Williams's Duration and Benjamin Moore's MoorGard Low Lustre are formulated to tolerate temps as low as 35 and 40 degrees, respectively.)
Throughout its 35 plus years in business, Shoreline has done extensive work throughout Fairfield County, including cities such as Darien, Westport, Greenwich and New Canaan. Our service area also extends to Westchester County, NY, New York City, and Rhode Island. Browse our portfolio of completed projects for examples of our superior workmanship throughout our operating territory.
Location: Stamford, CT Date: 01/06/2021 What is the approximate living square footage of your home?: 1500-3000 sqft What is the primary exterior surface material of your home?: Wood How many stories is your home?: Two stories What size is your attached garage?: 2-Car Garage Request Stage: Planning & Budgeting Desired Completion Date: Timing is flexible

I had Renato pain both interior and exterior (ongoing as I type). So far these projects have gone about as well as we could've hoped. Renato is great he is very good at staying on top of things and his crews are polite, work quickly and keep things cleaned up on a daily basis. I would highly recommend General Painting to anyone, including family and friends (which we've already done by the way). Thanks Renato.
A thorough scrubbing is a must before painting any exterior surface. It removes the dirt and broken-down paint residues that keep fresh coats from adhering and gets rid of mildew that grows on paint in all but the most arid climates. Most contractors clean with pressure washers, but in the hands of someone unfamiliar with the equipment, these can gouge wood, shatter glass, and drive water behind siding and trim. Using a hose, a pump sprayer, and a scrub brush is slower but safer, and just as effective.
×