Keep in mind that every project has different requirements, and some painter professionals maybe be more equipped to handle the specifications of your painting services work than others. Talk to multiple painters before deciding which one is right for you. You will want to consider how much they charge, if they are properly licensed for painting services work in Stamford, and if your project is a fit. Here are some suggested professionals and companies to get you started:
First Class Overhead Door LLC is the ideal choice for both homeowners and businesses in the area who value quality garage door replacement, installation, and repair work at fair and reasonable rates. We will always do our very best when serving our clients in CT and strive to exceed all expectations with our top-notch services. Call us at (203) 204-8004 today to set up your appointments with us!

06/14/17: Renato completed an exterior painting project for our relatively large single family home in Stamford, CT last weekend. Project did not begin well especially with the prep, repair/carpentry work, but then Renato took full control and ensured that the work done was to our satisfaction. The final result is outstanding. Minor damage to window screens, gutters and plants. Ensure that your window screens, gutters, and shutters are numbered and stored indoors or if kept outdoor covered properly against the elements. The project can be extensively delayed due to rain and you may find yourself dealing with insects and/or flooding in basement and dirty/bent/ mismatched screens/gutters/shutters. Overall we had a good team working on our project and we are satisfied with the finished product. The house looks great!
Paint made for the exterior of a house is formulated differently from that destined for interior paint jobs. Exterior house paint is blended to withstand rain, wind, and varying temperatures, while interior house paint is formulated to hide minor imperfections such as brush marks, handprints, and scuffs. Interior paints can be made washable for convenience, and doesn’t require exposure to light to cure.
Location: Stamford, CT Date: 01/04/2021 What is the occupancy of the house?: Empty of furnishings and unoccupied What needs to be painted? (Check all that apply): Wall, Trim What is the total square footage of the rooms to be painted?: Under 1500 sqft What is the average ceiling height of the rooms you want painted?: 8 ft Which rooms need to be painted? (Check all that apply): Living Areas, Dining Room, Hallways Number of Rooms: 3 - 4 Request Stage: Ready to Hire Historical Work: No Desired Completion Date: Timing is flexible What kind of location is this?: Home/Residence Comment: I would like to get an estimate for paint small apartment 3 rooms
Wesley and Robeson were very professional to work with. They did such a great job repairing our deck and painting. We consider them to be "our" contractors, and have found additional jobs for them to do. My dad and brother are contractors, and I know the quality and service to expect. A and W Construction set the new bar for craftsmanship, quality of work, professionalism as far as we're concerned. Such hospitable, polite people.
Location: Stamford, CT Date: 01/02/2021 What is the approximate living square footage of your home?: 1500-3000 sqft What is the primary exterior surface material of your home?: Wood How many stories is your home?: Two stories What size is your attached garage?: 1-Car Garage Request Stage: Planning & Budgeting Desired Completion Date: Timing is flexible Comment: house

O'Neil patches shallow holes and divots with Ready Patch because it dries fast, sands smooth, and stays flexible. Deep cracks and rotten spots are best repaired with two-step epoxies, such as those made by Advanced Repair Technology. (For a step-by-step instructions, see Repairing Rot with Epoxy.) The days of using polyester auto-body fillers on wood are over. "They cure too hard," says Portland, Oregon–based painting contractor Kathleen George. "They look good at first, but then they peel away."

As the dance proceeds, keep an eye on the weather. Rain can wash freshly applied latex right off the wall, and a temperature dip below 50 degrees F two days after application can interfere with adhesion and curing and dull the sheen of glossy paints. (Latexes like Sherwin-Williams's Duration and Benjamin Moore's MoorGard Low Lustre are formulated to tolerate temps as low as 35 and 40 degrees, respectively.)
Rome came to our house to take a look around back in May and promised me a quote by the end of the day-unlike other workers that we've had in the past, Rome stuck by his word and had it to me via email by dinnertime....something that reinforced the initial positive feeling that I had about him as he surveyed our home and listened to my ideas. We hired Rome and he and his crew began working on our home within the following couple weeks. Something we love about Rome is how knowledgable he is when it comes to the range of paint products and colors (we had a general idea that we wanted a light neutral color with a little tint of green and the easiest way for me was to have Rome narrow it down to 2-3 colors), for whatever advice or guidance we needed, he was always (and is always) a phone call away!

As the dance proceeds, keep an eye on the weather. Rain can wash freshly applied latex right off the wall, and a temperature dip below 50 degrees F two days after application can interfere with adhesion and curing and dull the sheen of glossy paints. (Latexes like Sherwin-Williams's Duration and Benjamin Moore's MoorGard Low Lustre are formulated to tolerate temps as low as 35 and 40 degrees, respectively.)
Some service pros are employees, franchisees, dealers or independent contractors ("Corporate SP's") of larger national or "Corporate Accounts". When this is the case, you may be matched with the Corporate Account or with one of their Corporate service professionals. The above screening process is not applicable to Corporate Accounts, as HomeAdvisor does not screen Corporate Accounts or Corporate service professionals.
O'Neil patches shallow holes and divots with Ready Patch because it dries fast, sands smooth, and stays flexible. Deep cracks and rotten spots are best repaired with two-step epoxies, such as those made by Advanced Repair Technology. (For a step-by-step instructions, see Repairing Rot with Epoxy.) The days of using polyester auto-body fillers on wood are over. "They cure too hard," says Portland, Oregon–based painting contractor Kathleen George. "They look good at first, but then they peel away."
×